How to fix bricked Lyf Wind 3/unroot/flash stock ROM:- If you are a owner of Lyf Wind 3 and facing any kind of problem in your Lyf Wind 3 like your phone has stucked at logo, Bootloop problem, hanging issue, software problem, feeling lagginess, if you’ve rooted your lyf Wind 3 and want to unroot it then today you you are going to learn how to fix soft-bricked Lyf Wind 3 by flashing stock ROM in it. So in this tutorial you will learn how to flash stock ROM in Lyf Wind 3.
Lyf Wind 3 was very nice device when it was launched at that price range. Lyf Wind 3 comes with very nice features like Screen Size: 13.97cm (5.5), Screen Resolution: HD, 1280 x 720 pixels, Processor (CPU): Quad-Core 1.2 GHz, Chipset: Qualcomm® SnapdragonTM 410 MSM8916, Graphics (GPU): Adreno 306 @ 409 MHz, RAM: 2 GB and the main focus of this phone is its powerful battery which is 2920 mAh.
One Solution (Flash Stock ROM) To Fix Every Single Problem In Fix Bricked Lyf Wind 3(LS-5502)
You can fix any of these listed problems in your Lyf Wind 3 by just flashing stock ROM. You can say these are the advantages of flashing Stock ROM in your Lyf Wind 3:
- If your Lyf Wind 3 is hanging or lagging too much
- If your Lyf Wind 3 is not starting
- If your Lyf Wind 3 stucked at its logo only
- Or if you have rooted your Lyf Wind 3 and want to unroot it again
- If you want to reset your Lyf Wind 3
- How to flash stock ROM/firmware in Lyf Wind 3
- How to Unroot Lyf Wind 3
- How to fix soft-bricked Lyf Wind 3
- If you’ve deleted any system app or configuration after rooting your Lyf Wind 3 (LS-5502)
- If your Lyf Wind 3 has stucked at Bootloop.
So above are the problems which you can solve very easily at home by just flashing stock ROM in your Lyf Wind 3. The main purpose of this tutorial is to teach you how to flash stock ROM/firmware in any Qualcomm snapdragon android devices along the example with Lyf Wind 3.
Warning:- this tutorial is only for Lyf Wind 3, please don’t try this on any other android device or only you will be responsible for any software damage in your phone. also try this tutorial at your own risk!
These are some requirements for flashing stock ROM/Firmware in your Lyf Wind 3 so make sure about this list:
- A PC or Laptop
- A Original data cable (which is not loose)
- Make sure your phone’s battery is charged at least 50%
- Keep patience in your mind while flashing stock ROM/Firmware in your Lyf Wind 3
- Make a full Backup of all your apps and important data, because flashing ROM might erase everything from your Phone’s memory. (If your phone is not bricked, otherwise leave this option)
- Download:- Lyf Wind 3 (Ls-5502) Stock ROM/Firmware
- Download:- QPST Tool & Qualcomm driver
- Install Qualcomm driver in your PC or Laptop.
How To Flash Stock ROM/Firmware In Lyf Wind 3 (LS-5502)
For flashing Stock firmware in Lyf Wind 3 (LS-5502), check once again all the requirements which I’ve mentioned above. If you’ve done then go further and follow these given steps very carefully:-
Step1: Install QPST and Qualcomm driver in your PC
Step2: Open QPST Tool and set it up for flashing process
After installing QPST Tool Qualcomm drivers in your PC open QPST ToolQPST Tool
After opening QPST Tool, you have to select build type, so select flat build, this is very important (after selecting flat build you will get options for flashing process).
Now extract your firmware which you have downloaded from above link. Now you have to click on browse button in Select programmer option.
Now select and open that MBN File from where you have extracted your Firmware folder
Now click on Load XML in download option
Select and open rawprogramO_restore_efs.xml and just after it you have to select patchO.xml
Step3: Put your Lyf Wind 3 in Download Mode
Switch off your Lyf Wind 3 and after few seconds press all the three buttons “Volume UP + Volume down + Power button” at a same time for few seconds until it vibrates and then connect it with your PC through a original data cable. After connecting with PC the QPST tool recognize your device and it will appears on screen like this:
Now click on Download button to start flashing stock ROM/firmware and wait while flashing process is in progress. It will take 10-15 minutes for download succeed. Now you can remove your device from PC and press power button to start, keep patient in your mind it will take some time like you’ve reset it.Download Succeed
- Top 8 Major Reasons For Any Soft-Bricked Android Smartphone (How To Avoid)
- DiskDigger Pro Apk: Free Download To Recover Lost Photos/Files From Android
- Top 10 Best Android Phones Under Rs 15000 (2017)
How To Flash Stock ROM/Firmware In Lyf Wind 3 – Summary
- Download and Install Qualcomm USB drivers in your PC
- Download and Install QPST Tool
- Download Stock ROM/Firmware and extract it
- Open QPST Tool
- Select Flat Build
- Browse and navigate MBN File from your extracted Firmware folder
- Click on Load XML and select rawprogramO_restore_efs.xml and patchO.xml
- Switch off your phone and press and hold all the three buttons “Volume UP + Volume down + Power button” at a same time until its vibrates after few seconds.
- Now connect your phone with PC through original data cable.
- Click on Download option in QPST Tool to start flashing process.
- In status when it appears “Download succeed”, remove your phone and press power button to switch on your phone.
- Congratulations! you have successfully flashed stock ROM/Firmware in Your Lyf Wind 3.